TechImpact Robot






A community of 50 3D-printed homes is under construction in Mexico (Homebuilding/Additive Manufacturing - 2019-12 - Singularity Hub)

Housing nonprofit, New Story, announced construction of their first community of 50 3D-printed homes, in Mexico’s southern state of Tabasco, of which 2 have been completed. The 500 sq.ft. houses have two bedrooms, a living room, kitchen, and bathroom. House frames are printed in about 24 hours, using a Vulcan II printer. They are intended for families currently living in makeshift shelters, who have a US$76.50 monthly income.

Show full article

These 3D-printed houses are made with on-site soil, along with bits of rice, and hydraulic lime (Homebuilding/Additive Manufacturing - 2019-10 - TechRadar)

Houses are built in 2 days with the Crane WASP 3D-printer, which constructs the eco-abodes on-site using 25% soil from the ground, and 40% straw and chopped rice, 25% rice husk, and 10% hydraulic lime. An example is a house made with raw earth measuring 21.6’ in diameter, and standing 9.8’ tall.

Show full article

Roofing drone nails down shingles (Roofing/Drone - 2019-09 -

Researchers at the University of Michigan have developed a pilot version of an autonomous octocopter that attaches asphalt shingles to roofs with a nail gun. This requires positioning the nail gun on a nailing point, placing the nail, and moving to the next point.

Show full article

A Swiss house built by robots promises to revolutionize the construction industry (Robotics - 2019-09 - Quartz)

Swiss researchers at ETH Zurich university and 30 industry partners have, over a 4-year period, built the first habitable building designed and planned, using a choreography of digital fabrication methods. The 3-level building near Zurich features 3D-printed ceilings, energy-efficient walls, timber beams assembled by robots on site, and an intelligent home system. The DFAB House, measuring 2,370 sq. ft needed 60% less cement and has passed the stringent Swiss building safety codes.

Show full article

Eventually, nearly every job on a construction site could be completed faster and safer with robots (Robotics - 2019-05 -

Robots are being used on construction sites for laying sheet piles, using 3D-printing to lay concrete or manipulate steel, laying bricks, and demolition.

Show full article

Using blockchain to eliminate business process waste in construction projects may save 5+% (Blockchain - 2019-04 - CoinBase)

A World Economic Forum report indicates that, by eliminating transactional costs associated with fragmented supply chains, blockchain drives value by simplifying processes and providing greater transparency. This will lead to greater trust and collaboration in construction projects.

Show full article

There will soon be a whole community of ultra-low-cost 3D-printed homes (Homebuilding/Additive Manufacturing - 2019-03 - Fast Company)

The “Vulcan II,” a massive, 33×11 ft machine can 3D-print the concrete frame of a small house in less than a day. Adding a conventional roof, windows, and utilities can be completed a day later. It will be printing a neighborhood of >50 homes in 2019.

Show full article

Big Area Additive Manufacturing technology can rapidly manufacture molds suitable for precast concrete manufacturing (Concrete/Additive Manufacturing - 2019-03 -

Researchers at the Department of Energy’s Oak Ridge National Laboratory are using Big Area Additive Manufacturing (‘BAAM’) technology to manufacture molds suitable for precast concrete manufacturing. The molds use carbon fiber reinforced acrylonitrile butadiene styrene (ABS), a common thermoplastic compounded with chopped carbon fibers. Each mold takes up to 19 hours to make. A Brooklyn tower is the first building to use the molds.

Show full article



People will be living in 3D-printed homes in 2019 (Construction/Homebuilding - 2018-12 - Architectural Digest)

The world’s first 3D-concrete-printed homes, fully outfitted with multiple rooms, will be built in 2019 in Eindhoven, Holland. The homes will first come in single-story units, with multi-level homes to be built shortly thereafter. A special concrete composition, which does not need steel reinforcements, was developed for the printers.

Show full article

The most amazing 3D-printing projects of 2018 (Construction - 2018-12 - MIT Technology Review)

The 6 3D-printing projects are: A steel pedestrian bridge (for Amsterdam); Concrete homes; BMW’s millionth component since 2010 (a window guide rail for the BMW i8 Roadster); The Refabricator (turning old plastic items into filament for printers); Self-tracking plastic objects (transmitting usage information); and Weddings (including a bouquet).

Show full article

The first 3D-printed steel bridge has been completed (Construction - 2018-10 - MIT Technology Review)

MX3D is 3D-printing a fully-functional stainless steel bridge to cross a canal in Amsterdam.

Show full article

This Japanese robot contractor can install drywall (Construction - 2018-10 - The Verge)

Japan’s Advanced Industrial Science and Technology has developed a humanoid robot that can carry out simple construction tasks, like installing drywall. The research institute is aiming for autonomous replacement of labor at assembly sites for large structures, such as buildings, houses, aircrafts, and ships.

Show full article

US Marine Corps Systems Command used a 3D printer to construct a concrete barracks measuring 500 sq ft in 40 hours (Construction/Buildings - 2018-09 - New Atlas)

The US Marine Corps Systems Command constructed a 500 sq ft prototype concrete barracks in 40 hours with one of the world’s largest 3D printer. (If soldiers receive a safe barracks in a shorter time, it could potentially save lives.) It normally takes 10 Marines five days to construct a similar hut out of wood.

Show full article

Netherlands building world's first habitable 3D printed houses and cycle bridges (Construction/Home Building - 2018-06 - The Guardian)

Offered because of a shortage of skilled bricklayers, the Dutch city Eindhoven is building concrete, habitable homes made by a 3D printer. Designs can be customized to whatever shape a purchaser wants. Foundations are conventional. Five houses will be rented in 2019. A 3D-printed cycle bridge was built in 2017.

Show full article

AI-powered drones increase efficiency, reduce cost, spotting problems humans might miss (Construction - 2018-06 - TechRepublic)

Drones monitor construction sites, farms, and critical infrastructure, sending back real-time data, which is subjected to AI analysis to spot problems. This increases efficiency, reduces costs, and may spot problems humans might miss.

Show full article

Japanese companies are using robots to help build skyscrapers (Robotics/High-rises - 2018-04 - MIT Technology Review)

Japanese companies are using robots in the construction of skyscrapers to weld beams, move supplies, and install ceiling panels. This only represents about 1% of the total labour. 

Show full article

MIT’s robot carpenters will saw wood for you (Robotics/Carpentry - 2018-02 - The Verge)

Researchers from MIT have created a new system of robot-assisted carpentry that could make custom furniture and fittings creation safer, easier, and cheaper. AutoSaw is made up of design software and semi-autonomous robots. Users select a template and then adjust for size and shape. This robots autonomously pick up and saw the necessary materials to the correct size. Then users put the finished product together.

Show full article


Robot paints walls in hard-to-reach places (Robotics/Painting - 2017-09 -

Estonian company, SprayPainter, has developed a graffiti robot that can climb up and down walls to create large-scale murals. The prototype device attaches 5 spray cans, each with a nozzle, to a little robot that climbs a wall and paints whatever giant image it is programmed to. It is tracked by a computer that determines its position by calculating its place on the cable it travels on. The system creates a full-color printed image in one pass by modulating the duration of each color spray. It mixes colors on the fly, by printing small dots of different colors side-by-side, so that when viewed from a distance the colors blend together.

Show full article

3D-printing a 380 sq ft home in 8 hours (Additive Manufacturing/Home Building - 2017-05 - Futurism)

PassivDom, a Ukrainian start-up, uses a 3D-printing robot that can print the walls, roof, and floor of a 380-square-foot model home in about eight hours. When complete, the homes are autonomous and mobile, meaning they don’t need to connect to external electrical and plumbing systems.

Show full article

Robotic system 3-D prints entire building's basic structure (Robotics/Buildings - 2017-04 -

Researchers at MIT have developed a robotic system (‘Digital Construction Platform’), capable of ‘printing’ the basic structure of an entire building. The system is comprised of a tracked vehicle that carries a large, industrial robotic arm, which has a smaller, precision-motion robotic arm at its end. As proof of concept, the research team built a 50′-diameter, 12′-high dome (2,000 sq ft), which took less than 14 hours of “printing” time.

Show full article

US company 3D-printed a 400 sq.ft. circular house using concrete in 24 hours (Additive Manufacturing/Home Building - 2017-02 - TheNextWeb)

San Francisco-based Apis Cor 3D-printed a 400 sq.ft. house in 24 hours using a concrete mixture which it says lasts around 175 years. The house was built on-site with a crane-shaped printer at their Moscow test facility at a cost of $10,134

Show full article


Subscribe to our free monthly newsletter

Terms & Conditions   |   Privacy Policy   |   Contact Us   |  About Us   |   Testimonials   |  Search  |  Home                ©  Ronnick Enterprises 2019, 2020, 2021